Loading ...
Loading ...
Loading ...
1.
2.
5O
Attach the Rear Stabilizer Cover (41) to the Rear Stabilizer (5) with two
Phillips Head Screws (58). Tighten with the Phillips Head Screw Driver (93).
Attach the Rear Stabilizer (5) to the Main Frame (1) by sliding two Flat
Washers (71) onto two Hex Head Bolts (.50); insert the bolts through the Rear
Stabilizer Attachment Plate (131), then into the rear stabilizer.Tighten using
the 12/14 mm Wrench (100).
| i
#50.3/8"x 2-1/4"
Hex Head Bolt (2 pcs)
#58. M5 x 12ram Phillips
Head Screw (2 pcs)
#71.3/8"x 25ram x 2T
FlatWasher (2 pcs)
CONSOLEMAST
Y
#51.5/16"x 5/8"
Hex Head Bolt (7 pcs)
#72.5/16"x 18ram x 1.ST
FlatWasher (6 pcs)
#99.5/16"x 19ram x 1.ST
Curved Washer (1 pc)
1. Unravel the Computer Cable (29) and pull the twist tie wire through the
Console Mast Cover (:38) (see illustration for the correct orientation of the
cover)and the Console Mast (:2)until the cable connector comes out the top
opening of the Console Mast.
2. Attach the Console Mast (:2)onto the Main Frame (1) with the seven Hex
Head bolts (51). Place six Flat Washers (72) on the side bolts and one Curved
Washer (99) on the front bolt. Tighten using the 12/14mm Wrench (100).
B94/R92 FITNESS BIKE 6
Loading ...
Loading ...
Loading ...