Loading ...
Loading ...
Loading ...
2.4 To move your
cleaner from room to
room, put handle in
upright position, tilt
cleaner back on rear
wheels and push
forward.
TRANSPORTING CLEANER
2.4
2.5 The cleaner can be
moved by using the
carrying handle located
on the back of the
cleaner.
2.5
CARRYING CLEANER
2.6 The handle of your cleaner has three positions;
upright for storage and when using cleaning tools;
operating position for general operation on carpet
and floors; low for reaching under low furniture.
Step on handle release lever to lower handle.
2.6
HANDLE POSITIONS
2.7 With red and green lights (A), the ‘Dirt FINDER’
system alerts the user to areas of carpet that may
need more cleaning attention. It is able to sense
when larger amounts of dirt particles, especially
embedded dirt, are removed.
To let you know that the ‘Dirt FINDER’ feature is
ready the red light will come on when the cleaner is
first turned on. After a few seconds, the red light will
go off and the green light will come on. Cleaning
may then begin.
The green light will remain on throughout cleaning
except when the detector senses that a larger
amount of dirt is being picked up; then the red light
will come on.
When the red light is on, you should take additional
cleaning strokes in the area until it changes to
green.
EMBEDDED DIRT FINDER
TM
FEATURE
(Available on select models only)
A
B
2.7
7
Actual model may vary from images shown.
2.3
2.3 This feature allows you to control how quickly the cleaner moves.
SELF-PROPEL FEATURE
The self-propel feature operates only
when the cleaner switch and the self
propel button are both ON.
IMPORTANT
To move forward, push handle forward and guide cleaner away from you.
To move backward, gently pull handle back and guide the cleaner toward you.
Guide cleaner carefully at first until you have adjusted to the ease of
operation.
For increased control in tight places (e.g., around and under furniture, non-
carpeted floors), slide the self-propel button to OFF to deactivate the feature.
• The red light may
seldom come on during
cleaning. This means
that your cleaner is
picking up primarily fine
surface dust and lint
which the system may
not detect, or that the
carpet is generally clean. To increase the feature’s
sensitivity to dirt, set the switch (B) to the “Hi”
position.
• At other times, the red light may stay on for a
considerable amount of time. This means that the
carpet contains a high level of dirt which is being
removed by the cleaner. To decrease the feature’s
sensitivity to dirt, set the switch to the “Reg.”
(Regular) position.
Loading ...
Loading ...
Loading ...