Loading ...
Loading ...
Loading ...
B
3.5
The final filter assists in the filtration process to return
clean air to the room.
The 3 layer filter (some models) can be washed in
the same manner as the secondary filter and
reused.
3.5 To remove final filter, first open the door on the
side of the cleaner. Grasp filter (B) and pull it straight
out. Reposition new filter by reversing this
procedure.
Final Filter
The filter door is designed with a “break-away“
feature which allows it to snap free if it is pushed
open too far.
How to Reattach Filter Door
C
3.6
CHECK BRUSHROLL CHANNELS
Because your WindTunnel™ cleaner picks up so
well, we strongly recommend you check for debris
accumulation in the channels next to the brushroll
when you check the filters. Removing this debris
will help maintain you cleaner’s excellent pick up
and suction.
Remove debris as follows:
1) Disconnect cleaner from electrical outlet.
2) Check for debris accumulation by removing
bottom plate (Fig. 3.9) and looking in the channels
next to the brushroll (Fig. 3.18).
3) Remove any accumulation.
4) Reposition bottom plate (Fig. 3.13).
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
Do not operate cleaner without either the
secondary or final filter in place.
What to Buy: Final Filter
Additional filter is available at Hoover.com or call
1-800-944-9200. Use only genuine HOOVER
®
Final Filter with your vacuum. The final filter can be
replaced with any of the following filters: 3 layer,
washable - HOOVER
®
part No. 40110006
12
Actual model may vary from images shown.
3.7
HEADLIGHT
Removing Lens
3.7 Using a Phillips screwdriver, remove the two
screws as shown and lift off lens.
Installing Bulb and Replacing Lens
3.8 Pull old bulb straight out of socket. Push new
bulb straight into socket until locked in place.
Excessive force is not required.
Reposition lens and secure with the two screws.
3.8
What to Buy: Headlight
This cleaner uses a 12 volt, wedge base type
912 bulb, Hoover part No. 27313101.
Additional bulbs may be ordered at Hoover.
com or call 1-800-944-9200.
To reduce the risk of electrical shock, unplug
vacuum before cleaning or servicing.
(Available on some models)
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
3.6 To reattach, align hinges (C) of cover with slots
on sides of filter area.
Press door back into place.
CAUTION
! !
Loading ...
Loading ...
Loading ...