Loading ...
Loading ...
Loading ...
TROUBLESHOOTING GUIDE ....
Problem Possible Cause
•Water supply is not adequate
in area
. Water supply taps are not
completely open
•Water inlethose is bent
• The filter of the inlet hose
clogged
•Drain hose is bent
or clogged
•The drain filter isclogged
•Load is too small
•Load is out of balance
. The appliance has an
imbalancedetection and
correction system If individual
heavy articlesare loaded (bath
mat. bath robe, etc,) and the
imbalance is too great, after
severai attempts to restart the
spin cycle the machine wi[[
stop and the error code will be
displayed
•Is the door opened or not
completely cIosed?
• The water overfills due to the
faulty water valve
•The water level sensor
malfunction,
• Overload in motor.
• Overload in motor,
•The washer experienced a
power failure
Solution
Check another tap in the house
Fully open tap,
Straighten hose
Check the fiffer of the inlet hose
Clean and straighten the drain hose
Clean the drain filter.
Add 1 or 2 similar itemsto help
balance the toad,,
Rearrange ;oadto allow proper
spinning
Close the door completely
* If dE is net released, cal} for service
Unplug the power plug and call for service
Close the water tap.
Unplug the power plug
Call for service
Restart the cycle
22
Loading ...
Loading ...
Loading ...