Loading ...
Loading ...
Loading ...
MAIN'iENANCE : :
Before cleaning the washer interior_ unplug the electrical power cord to avoid electTical shock ha7_ards.
When dispasing _f the appliance, cu! .iT the power cable, destroy the plug. and disable the door lock to pr_venA
yuung children fr_m being trapped inside.
- The water inlet filter
•" fE "error message will blink onthe control panel when water does not enter the dispenser
• If your water is very hard or contains traces of lime deposit the water inletfilter may become clogged
We recommend cleaning tt every few months
1 Turn off the
water tap
2 Unscrew
the water
inlethose
3 Clean the
liiter using
a hard
bristle
brush
4 Tighten
the inlet
hose
= The drain pump filter
,'Thedrain filtercoliectsthreadsand smallobjeclsleftinthelaundry
Checkregularlythat theliederiscleanto ensuresmoothrunningofyourmachine.
Drain, using the drain hose, beforeopening the pump filter to remove objects
Be careful when draining if thewater is hot
= Allow the water to cool down belore cleaning the drain pump filter
1 Open the lower cover cap (_)
Turn the drain plug ((_) topull
out the hose
2 Unplug the drain plug (_))
allowing the water to flow out
At this time use a vessel to
prevent water from flowing
onto the floor When water does
not flow any more, turn the
pump filter((_) open to the left
3 Remove out any Ioreign obiects
from the pump filter (_)) After
cleaning turn the pump filter (_)
clockwise and insert the drain
plug (_)) tothe original place
Close the lower cover cap((_)
27
Loading ...
Loading ...
Loading ...