Loading ...
Loading ...
Loading ...
TROUBLESHOOTING GUIDE
* This _ashing machine is equipped with automatic safety functions _qzich detect and diagnose problems at an
early stage and react appropriately. When tile machine dues not funethm properly or does net function at all,
check the following points before yon call the Service Department.
Problem Solution
Rattting and clanking noise
Thumping sound
Vibrating noise
Water leaks
Possible Cause
- Foreign objects such as coins
or safety pins may be in drum
or pump
• Heavy wash loads may
produce a thumping sound
This is normal
•Have a[[the transit bolts and
packing been removed?
•Wash load may be unevenly
distributed in the drum
• Are all the feet resting firmly
on the ground?
• Fill hose connection is loose at
Stop washer and check drum and drain
filter
Ifnoise continues after washer isrestarted,
call for service
Ifsound continues, washer isprobabty out
of batance Stop and redistribute wash
load
See Installation|nstructions for removing
shipping bolts,
Stop washer and rearrange wash load
Adjust the leveling feet,
Make sure all four feet are in firm contact
with the floor, whilethe washer is inthe
spin cycle with a load
Check and tighten hose connections
Excessive suds
tap or washer
• House drain pipes are
clogged
- Too much detergent or
unsuitable detergent.
Unclog drain pipe Contact plumber if
necessary
Reduce detergent amounts or use low
sudsing detergent.
Water does not enter
washer or it enters slowly
Water inthe washer does
not drain or drains slowly
•Water supply is not adequate
in area.
•Water supply tap is not
completely open,
• Water inlet hose is bent.
-The filter of the inlet hose
clogged
• Drain hose is bent or clogged
•The drain filter is clogged,
Check another tap in the house,
Futly open tap
Straighten hose
Check the filter of the inlet hose
Clean and straighten the drain hose,
Clean the drain filter
2O
Loading ...
Loading ...
Loading ...