Loading ...
Loading ...
Loading ...
31-2000654 Rev. 3
Installation Preparation
PROVIDE CABINET SUPPORT
IMPORTANT: When installed below a single or double
oven, check to be sure that any oven supports above
WKHFXWRXWGRQRWREVWUXFWWKH´UHTXLUHGGHSWKRI
the warming drawer cutout.
Ŷ$´PLQFOHDUDQFHEHWZHHQRYHQDQGZDUPLQJ
drawer cutouts are required. Additional clearance may
be required if 2 x 4 blocks are used to support runners
or solid floor of the oven above.
Ŷ7KHZDUPHUGUDZHUPD\EHVXSSRUWHGE\HLWKHUD
solid bottom, 2 x 4 or 2 x 2 runners.
Ŷ7KHVXSSRUWPXVWEHOHYHODQGULJLGO\PRXQWHGIOXVK
with the bottom edge of the cutout.
– There is no way to level the drawer once it has been
installed. Be sure supports are level.
Ŷ7KHHQWLUHZHLJKWRIWKHGUDZHULVVXSSRUWHGE\
the runners or solid floor and must be capable of
supporting 150 lbs.
FLUSHMOUNT INSTALLATION PREPARATION
PREPARE THE INTERIOR
Cut and install side cleats:
Ŷ Cut side wood cleats to height of cabinet opening and
DSSUR[´LQGHSWK,QVWDOORQHDFKVLGH(IURP
the front face of the cabinet.
Cut and install bottom cleat:
Ŷ Cut bottom wood cleat to a height of 1” minimum,
a depth of the cabinet minus E and a width of the
cabinet opening D.
Install onto the cabinet floor between the side cleats,
push it all the way back against cabinet wall and make
sure its front face aligns with the front faces of the
side cleats (E gap from the front cabinet face).
2”x4” or
Equivalent Runners
25”
30”
´´
22”
´
2”x4” or
Equivalent Runners
E
C
B
D
A
A
TOP
VIEW
Front Face of Cabinet
EE
A A
C
D
30” 27”
A Side cleats depth ´PLQ ´PLQ
B Bottom cleat height 1” min. 1” min.
C Bottom cleat depth Cabinet depth
minus E
Cabinet depth
minus E
D Bottom cleat width ò´PLQ±´
max. (30” minus
2 side cleat
thicknesses of
´HDFK
25 ½” min. – 26”
PD[´PLQXV
2 side cleat
WKLFNQHVVHVRI
3/4” each)
E All three cleats
inset from cabinet
front
´ ´
Loading ...
Loading ...
Loading ...