Loading ...
Loading ...
Loading ...
28 HOW TO USE
Automatic Icemaker
Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and
sent to fhedispenser The icemaker will
produce 70-210 cubes in a 24-hour period,
depending on freezer compartment temperature,
room temperature, number of door openings and
other operating conditions.
* It fakes about 12 to 24 hours for a newly
installed refrigerator to begin making ice. Wait
72 hours for full ice production to occur
o Ice making stops when the in-door ice bin is fuji
When full, the in-door ice bin holds approximately
6 to 8 (12-16 oz or 340-455 cc) glasses of ice
° The water pressure must be between 20 and 120
psi (140 and 830 kPa)on models without a water
filter and between 40 and 120 psi (280 and 830
kPa) on models with a wafer filter to produce the
normal amount and size of ice cubes
* Foreign substances or frost on the ice-detecting
sensor can interrupt ice production
Make sure the sensor area is clean af all times
for proper operation
Icemaker
Switch
ice-defecting
Sensor
Wafer fills the ice fray.
1 hour later from
supplying wafer
* 60 minutes after water has been added
fo the ice tray, the ice tray wilI sit slightly
filled to help the cold air reach the ice.
* The ice-detecting sensors will sense
when the ice is ready to be dumped
into the ice bin
Turning the Automatic Icekarner
On or Off
To turn off the automatic icemaker, set the
icemaker switch to OFF (O) To turn on the
automatic icemaker, set the switch fo ON (I).
Loading ...
Loading ...
Loading ...