Loading ...
Loading ...
Loading ...
26 HOW TO USE
Control Panel F'eafures (continued)
Fresh Air Filter
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
wilt switch back to Auto mode.
Auto mode is the default mode.
• The Press the Air Filter button once for
Power(PWR) mode.
. Press the Air Filter button again to switch
back to Auto mode.
Light --O--
Press the LIGHT button, to turn on the
dispenser light. The indicator will appear on the
LED display.
Change Filter _
When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hotd the FILTER
button for three seconds to turn the indicator
light off. You need to change the water filter
approximately every six months.
Alarm
, When power is connected to the
refrigerator, the door alarm is initially set to
ON. When you press the ALARM button,
the display witl change to OFF and the
Alarm function wilt deactivate.
, When either the refrigerator or the freezer
door is left open for more than 60 seconds,
the alarm tone wilt sound to let you know
that the door is open.
. When you close the door, the door alarm
will stop.
Control Lock
The Control Lock function disables every other
button on the display.
When power is initially connected to the
refrigerator, the Lock function is off.
tf you want to activate the Lock function to
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon wilt display and the Lock function is
now enabled.
- To disable the Lock function, press and hold
the Lock button for approximately three
seconds.
--_ CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling
in the refrigerator and freezer sections
to conserve energy while on display in
a retail store. When activated, OFF will
display on the control panel.
To deactivate:
With either refrigerator door opened,
press and hold the Refrigerator and
Ice Plus buttons at the same time for
five seconds. The control panel will
beep and the temperature settings witl
display to confirm that Display Mode is
deactivated. Use the same procedure
to activate the Display Mode.
Loading ...
Loading ...
Loading ...