Loading ...
Loading ...
Loading ...
EN - 9
7.5 CLEANING THE AIR FILTER
and must be replaced if it is broken or damaged.
1.
2. unscrew the screw ( to remove the grid (
21.A);
3. ;
4.
dry it with a clean cloth (.
IMPORTANT Do not use petrol, detergents or any other
products to clean the ltering element.
5.
debris or dirt;
6.
perfectly dry) (;
7. and tighten in place with the
screw (
7.6 CUTTING MEANS
A badly sharpened cutting means pulls at the grass and
causes the lawn to turn yellow.
Do not touch the cutting means until the key has
been removed and the cutting means is completely
stationary.
All work on the cutting means (disassembly,
sharpening, balancing, repairing, reassembly and/or
replacing) are demanding jobs that require special
skills as well as special tools. For safety reasons,
these jobs are best carried out at a Specialised Centre.
Make sure damaged, mis-shapen or worn cutting-
means are replaced, together with its own screws in
place to preserve balance.
IMPORTANT Always use original cutting means bearing
the code indicated in the "Technical Data".
"Technical Data" table may be replaced in time with others
having similar interchangeable and operating safety
features.
8. STORING
8.1 STORING THE MACHINE
1. Wait for the motor to cool
2. Remove the safety key.
3.
4. Check there are no loose or damaged components.
tighten any screws and loose bolts or contact the
authorised service centre.
5.
– in a dry place;
– protected from inclement weather;
– covered with a sheet where possible;
– in a place where children cannot get to it;
– making sure that keys or tools used for maintenance
are removed.
8.2 STORING THE BATTERY
humidity.
NOTE If unused for any length of time, recharge the
battery every two months to prolong its working life.
9. HANDLING AND TRANSPORTATION
–
– remove the safety key;
– make sure that all moving parts have come to a
complete stop;
– wear heavy work gloves;
–
taking into account the weight and its division;
– use an appropriate number of people for the weight of
the machine and the characteristics of the vehicle or
the place where it must be placed or collected;
– make sure that machine movements do not cause
1.
length;
2.
pushed by an adequate number of people;
3. lower the cutting-means assembly;
4. position it so that it can not cause a hazard for anybody;
5.
chains to prevent it from tipping over.
10. ASSISTANCE AND REPAIRS
This manual provides all the necessary information to run
the machine and for correct basic maintenance operations
which can be performed by the user. Any regulations and
maintenance operations not described herein must be
which have the necessary knowledge and equipment to
the correct degree of safety and the original operating
conditions of the machine.
Any operations performed in unauthorised centres or by
all obligations and responsibilities of the Manufacturer.
• Only authorised service workshops can carry out
guaranteed repairs and maintenance.
• The authorised service workshops only use genuine
spare parts. Genuine spare parts and attachments have
Loading ...
Loading ...
Loading ...