Loading ...
Loading ...
Loading ...
Installation
35
EN
5 Installation
5.1 Minimum clearance to
combustible surface
A 200mm (Vertical combustible surface)
B 600mm (Overhead) measured form the
highest part of the highest burner and
750mm for an exhaust fan.
C 65mm (non-combustible surface)
D 20mm (benchtop)
X (width) & Y (depth) see appliance
dimension within this manual.
Refer to AS/NZS 5601 (Protection of a
combustible surface) if the above minimum
clearances cannot be achieved.
The top of the pan support is 62mm above
the bench top.
Appliance dimensions (mm)
Position of gas and electrical connections.
(seen from below)
90 cm
5.2 Mounting
Over empty kitchen unit or drawers
If there are other pieces of furniture (lateral
walls, drawers, etc.), dishwashers or fridges
under the hob, a double-layer wooden
base must be installed at least 20 mm from
the bottom of the hob to avoid any
accidental contact. It must only be possible
to remove the double-layer base using
suitable equipment.
Over built-in oven unit
The clearance between the hob and the
kitchen furniture or other installed
appliances must be enough to ensure
sufficient ventilation and air discharge. If
installed above an oven, a space must be
left between the bottom of the hob and the
top of the appliance installed below.
A35
B28
Loading ...
Loading ...
Loading ...