Loading ...
Loading ...
Loading ...
EN - 28
13. MAINTENANCE TABLE
Operation Interval (hours) Paragraph
/ Notes
First time Subsequently every
MACHINE
Safety checks/check controls
Before each use par. 6.2
Tyre pressure check
Before each use par. 6.1.3
Check the rear/lateral discharge guards. Check the
grass catcher bag and lateral discharge chute.
Before each use par. 6.1.4
General cleaning and inspection
After each use par. 7.6
Checking for any damage to the machine. If
necessary, contact the Authorised Service Centre.
After each use -
Charging the battery
Before storage
par. 7.5
Complete bolt and screw check
25
Cutting device positioning and sharpening check
25 ***
Transmission belt check
25 ***
Cutting device control belt check
25 ***
Brake regulation and check
25 ***
Drive regulation and check
25 ***
Cutting device gear and brake check
25 ***
General lubrication
25 ****
Replacing cutting device
100 ***
Replacing the transmission belt
- ** / ***
Replacing the cutting device control belt
- ** / ***
ENGINE *
Checking/topping up fuel level
Before each use par 7.2
Check/top-up engine oil
Before each use par 7.3
Replacement of the engine oil
* *
Air lter cleaning and check
* *
Air lter replacement
* *
Fuel lter check
* *
Fuel lter replacement
* *
Spark plug points cleaning and check
* *
Replace the spark plug
* *
* Consult the manual supplied with the engine for a complete list of
maintenance operations and the corresponding intervals
** At the rst signs of any malfunction, contact your Dealer immediately
*** The operation must be carried out by your Dealer or a Authorised Service Centre
*** General lubrication of all joints should also be carried out whenever
the machine is to be left unused for a long period
Loading ...
Loading ...
Loading ...