Loading ...
Loading ...
Loading ...
Glass Cooktop Surface Cleaning
Gas Cooktop
Normal daily
use cleaning
ONLY use CERAMA BRYTE :Ceramic Cooktop
Cleaner on die glass cooktop. Odler creams may
not be as efl:ective.
To maintain and protect the smface of your glass
cooktop, fbllow these stops:
1.
.
3.
Before using die cooktop for file fix_t time,
remove the burner grates and clean the
cooktop with CERAM A BRYTF Ceramic
Cooktop Cleaner This helps promct the top
and makes cleanup easier
Daily use of CERAMA BRYTE ': Ceramic
Cool<top Cleaner will help keep the cool<top
looldng new.
Shake the cleaning cream well. Apply a few
drops of CERAMA BRYFE : Ceramic Cooktop
Cleaner directly to the cooktop.
4. Use a paper towel or CERAMA BRYTE :
Cleaning Pad for Cermnic Cooktops to clean
the entire cooktop surface.
5. Use a dry cloth or paper towel to remove all
cleaning residue. No need to rinse.
NOTE:" It is very important that you DO NZ)T heat
the co&t@ until it has been cleaned thorougJdy.
Cleanyourcooktop after each
spill. UseCERAIVlABRYTE®
Ceramic CooktopCleaner.
JBtt rned-on
residue
WARNING: D AGEtoto., gl.ss
smfhce may occur if you use scrub pads other
than the pad included with your cooktop.
AVERTISSEMENT ."
Vous pouvez ENDOMMAGER votre surface
en vitroc&amique si vous utilisez des Sponges
de r_curage autres que celles comprises avec
wme appareil.
1. Allow the cooktop to cool.
2. Remove the burner grates. Spread a few
drops of CERAMA BRYTF Ceramic Cooktop
Cleaner on the entire burned residue area.
3. Using the included CERAMA BRUFE':
Cleaning Pad for Ceramic Cooktops, rub the
residue area, applying pressme as needed.
4. If any residue remains, repeat the steps listed
above as needed.
5. For additional protection, af*er all residue
has been removed, polish the entire surface
with CERAMA BRYTE :Ceramic Cool<top
Cleaner and a paper towel.
Use a CERAMABRYTE®Cleaning
Padfor Ceramic Cooktops.
Heavy,
burned-on
residue
1°
2.
3°
Allow tim cooktop to cool.
Remove tim burner grates. Use a single-edge
razor blade scraper at approximately a 45°
angle against the glass surface and scrape
the soil. It will be necessary to apply pressure
to the razor scraper in order to remove the
residue.
Aider scraping with the razor scrapeI; spread
a few drops of CERAMA BRYTE :Ceramic
Cooktop Cleaner on the entire burned residue
area. Use the CERAMA BRYI'E :Cleaning Pad
to remove any remaining residue.
4. For additional protection, after all residue
has been removed, polish the entire surface
with CERAMA BRYTE : Ceramic Cooktop
Cleaner and a paper towel.
The CERAMABRYTE®Ceramic Cooktop
Scraper and all recommended supplies are
available through our Parts Center.See
instructions under "To Order Parts" section
on next page.
NOTE:Do not usea dull or nicked blade.
17
Loading ...
Loading ...
Loading ...