Loading ...
Loading ...
Loading ...
Cleaning and maintenance
75
EN
11. Remove the cover from the evaporation
tray and dry it with the sponge supplied.
12. We recommend positioning the
supplied sponge inside the evaporation
tray.
13. Press the symbol to start draining
the remaining solution from the reservoir.
The residual mixture is drained into the
evaporation tray.
Because the quantity of mixture remaining is
greater than 500 ml, drainage of the
mixture into the evaporation tray will take
place in two different steps in order to
facilitate drying. The display indicates “step
1 of 2”, which when finished, drainage
stops. You have to press the control knob
again in order to complete the discharge
with “step 2”. When finished, “reservoir
cleaning ended” appears on the display.
14. Use the sponge provided to remove
any remaining mixture from the
evaporation tray.
15. Press the control knob to exit from the
reservoir cleaning procedure.
After having cleaned the reservoir
with the mixture of water and citric
acid, carry out at least one “clean
reservoir” cycle using ordinary
water in order to rinse out any
residues there may be from the
reservoir.
Loading ...
Loading ...
Loading ...