Loading ...
Loading ...
Loading ...
Cleaning and maintenance
70
End of the Vapour Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use a non-scratch sponge with brass
filaments on hard to remove deposits.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the water left inside the oven.
5. For improved hygiene and to avoid food
being affected by any unpleasant
odours, we recommend that the oven is
dried using a fan assisted function at
160°C for approximately 10 minutes.
4.7 Descaling
The following message will appear on the
display from time to time to indicate that you
should carry out the descaling of the
evaporation tray on the bottom of the oven.
1. Press yes to accept the request to run the
descaling procedure.
2. Open the door completely.
We recommend wearing rubber
gloves for these operations.
We recommend removing the
door in order to make the manual
cleaning of the parts that are
difficult to reach easier.
Failure to descale the appliance
can cause lime scale build up and
in the long run prevent the
appliance from working correctly.
Loading ...
Loading ...
Loading ...