Loading ...
Loading ...
Loading ...
Problem Possible Cause Correction
Flow noise on
the soft stop
mechanism.
The temperature
display indi-
cates: F0 to F9.
There is a fault.
u
Contact the customer service department (see Main-
tenance).
DEMO lights up
in the tempera-
ture display.
The demo mode is activated.
u
Contact the customer service department (see Main-
tenance).
The outside
surfaces of the
appliance are
hot*.
The heat of the refrigerant circuit is
used to prevent condensate from
forming.
u
This is normal.
The temperature
is not cold
enough.
The door of the appliance is not
closed properly.
u
Close the appliance door.
Insufficient ventilation.
u
Clear ventilation grilles.
The ambient temperature is too high.
u
Solution: (see 1.3)
The appliance was opened too
frequently or for too long.
u
Wait to see whether the required temperature resets
itself by itself. If not, contact the customer service
department (see Maintenance).
The temperature is incorrectly set.
u
Set to a colder temperature and check after 24 hours
The appliance is too near to a heat
source (stove, heater etc).
u
Change location of appliance or the heat source.
The appliance was not properly
installed in the recess.
u
Make sure the appliance was installed correctly and
the door closes properly.
The interior light
is not on.
The appliance is not switched on.
u
Switch on the appliance.
The door was open for longer than
15 minutes.
u
The interior light automatically switches itself off if
the door has been open for about 15 minutes.
The LED interior light is faulty or the
cover is damaged
WARNING
Risk of injury from electrical shock.
Live parts are under the cover.
u
The LED interior light should only be replaced or
repaired by the Customer Service department or by
engineers trained to do so.
WARNING
Risk of injury from LED lamp!
The lighting intensity of the LED light complies with laser
class 1/1M.
If the cover is faulty:
u
Do not gaze directly at this lighting unit with optical
lenses while very close to the light source. This can
cause damage to your eyes.
Troubleshooting
14 * Depending on model and options
Loading ...
Loading ...
Loading ...