Loading ...
Loading ...
Loading ...
1. Overview1. Overview
16. Edit / All Rev
17. Add or Kill/ Rec Exit
18. Record/ Shift
19. Master A Button
20. Park Button
21. Hold Button
22. Step Button
23. Audio Button
24. Master Slider A
25. Master Slider B
26. Blind Button
27. Home Button
28. Tap Sync Button
29. Full On Button
30. Black Out Button
31. Fade Time Slider
32. Speed Slider
33. Audio Level Slider
34. Fog Machine button
35. Power Switch
36. DC Input
37. MIDI Thru/Out/In
38. DMX Out
39. DMX Polarity Select
40. Audio Input
41. Remote Input
42. Fog Machine Connector
All Rev is to reverse the chasing direction of all programs.
This switch controls turning on or off of the power.
DC 12-20V, 500 mA Min.
MIDI ports for connection to a sequencer or MIDI device.
or DMX pack.
Used to select DMX polarity.
from 100mV to 1Vpp.
control using a standard 1/4"stereo jack.
Black Out and Full On may be controlled by a remote
This jack accepts a line level audio input signal ranged
This connector sends your DMX value to the DMX fixture
Rec Exit is used to exit from Program or Edit mode.
Shift functions only used with other buttons.
Brings channel 1-12 to full of current setting.
Master B slider, depending on the current mode.
This button is used to maintain current scene.
is pushed to the bottom or in Edit mode.
Activates audio sync of chase and audio intensity effects.
This slider controls overall output of all channels.
This slider controls the chase of all programs.
in CHNS /SCENE mode.
This button is used to deactivate the Blind.
Repeatedly tapping this button establish the chase speed.
This function bring overall output to full intensity.
resulting from Flash and Full On.
Used to adjust the Fade Time.
Used to adjust the chase speed.
This slider controls the sensitivity of the Audio input.
This button is used to kill all output with exception for that
This function takes the channel out of the chase of a program
This button is used to go to next step when the Speed Slider
full of current setting, or momentarily program a scene into
Used to select Single/Mix Chase, bring Channel 13-24 to
Record is used to activate Record mode or program a step.
scenes or programs.
In Kill mode, pressing any Flash button will kill any other
at a time.
In Add mode, multiple scenes or Flash buttons will be on
Edit is used to activate Edit mode.
1.2 Rear View1.1 Front View
DC INPUT
DC 12V~20V
500mA min.
+
100mV~1Vp-p
AUDIO
LINE INPUT
1/4"stereo jack
Full on
GND
REMOTE
IN
OUT
THRU
MIDI DMX OUT
DMX Polarity Select
1
2
3
1=Ground
2=Data
3=Data +
1=Ground
2=Data +
3=Data
ON OFF
POWER
FOG MACHINE
Stand By
or Black Out
35
36
40 424137 38 39
5 6
Loading ...
Loading ...
Loading ...