Loading ...
Loading ...
Loading ...
2. Operation Guide2. Operation Guide
2.2 Editing
2.2.7 Modify a Step or Steps
2.3.1 Running Chase Programs
2.3 Running
1. Enter Edit mode.
2. Tap the Step button to scroll to the step you wish
to modify.
3. Press and hold the Up button if you want to raise
the intensity.
If you want to lower the intensity, press and hold
down the Down button.
5. Repeat steps 2, 3 and 4 until all the steps have
been modified.
6. Exit Edit mode.
4. While holding down the Up or Down button, tap
the Flash button corresponding to the DMX
channel of the scene you wish to modify until
you reach the desired intensity value read from
the Segment Display. Then you may tap the
Flash buttons until you are satisfied with the
new scene.
STEP
UP
UP
1. Tap the Mode Select button to select CHNS
SCENE mode indicated by the red LED.
2. Tap the Page button to select the correct page
the program you wish to run is located.
3. Push Master Slider B to its maximum
position(fully down).
SELECT
MODE
CHNS
A B
DOUBLE
1-24 SINGLE
PRESET
PRESET
SCENES
PAGE
1 2 3 4
1817
10
8
6
4
2
0
10
8
6
4
2
0
A B
MASTER
10
8
6
4
2
0
10
8
6
4
2
0
Loading ...
Loading ...
Loading ...