Loading ...
Loading ...
Loading ...
2.1.3 Program Scenes2.1.3 Program Scenes
2. Operation Guide2. Operation Guide
3. Create a desired scene using Channel Sliders
1-48. At 0% or DMX 0, these sliders should be
at 0 position, and at 100% or DMX 255, these
sliders should be at 10 position.
RECORD
RECORD
RECORD
REC
EXIT
FLASH 25-48
PAGE
4. Once the scene is satisfactory, tap the Record
button to program the scene as a step into the
memory.
5. Repeat step 3 and step 4 until all desired steps
have been programmed into memory.
You may program up to 1000 steps into memory.
6. Select a chase bank or scene master to store
your program. Tap the Page button to select a
page(Page 1-4) to store your scenes.
1 2 3 4
7. Press a Flash button between 25-48 while
holding down the Record button. All LED
will flash indicating the scenes have been
programmed into memory.
8. You can continue programming or exit.
To exit Program mode, tap the Exit button
while holding down the Record button, the
Record LED should go out.
EXAMPLE: Program a 16 steps chase with channel 1-32 at full in
sequence into Flash button 25 of Page 1.
1. Record enable.
2. Push Master A & B to maximum position and Fade slider to top.
3. Tap the Mode Select button to select 1-48 Single mode.
4. Push Channel slider 1 to the top position, its LED light at full intensity.
5. Tap the Record button to program this step into memory.
6. Repeat steps 4 and 5 until you've programmed Channel sliders 1-32.
7. Tap the Page button causing Page 1 LED lights.
8. Tap the Flash button 25 while holding down the Record button, all LEDs
will flash indicating you've programmed the chase into memory.
9 10
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
1 2
Loading ...
Loading ...
Loading ...