Loading ...
Loading ...
Loading ...
2. Operation Guide2. Operation Guide
2.2 Editing
2.2.5 Delete a Step or Steps
2.2.6 Insert a Step or Steps
2.2.6 Insert a Step or Steps
EXAMPLE: Delete the third step of the program on Flash button 25
on Page 2.
EXAMPLE: Insert a step with channels 1-12 fully on at a time between
step 4 and step 5 of program 35.
1. Record enable.
2. Tap the Mode Select button to select CHNS SCENE mode.
3. Tap the Page button until Page 2 LED lights.
4. Tap the Flash button 25 while pressing and holding down the Edit button, the
Scene LED lights.
5. Tap the Step button to scroll to the third step.
6. Tap the Delete button to delete the step.
7. Tap the Rec Exit button while pressing and holding down the Record button
to exit Edit mode.
1. Record a scene or scenes you wish to insert.
2. Be sure you're in CHNS SCENE and
Enter the Edit mode.
3. Tap the Step button to scroll to the step which
you wish to insert before. You may read the step
from the Segment Display.
STEP
INSERT
4. Tap the Insert button to insert the step you've
created before, all LEDs will flash, indicating
the step is inserted.
5. Exit Edit mode.
1. Record enable.
2. Push Channel sliders 1-12 to the top and record the scene as a step.
3. Tap the Mode Select button to select CHNS SCENE mode.
4. Tap the Page button until Page 2 LED lights.
5. Tap the Flash button 35 while holding down the Edit button, the corresponding
scene LED lights.
6. Tap the Step button to scroll to the step 4.
7. Tap the Insert button to insert the scene you've created before .
1615
Loading ...
Loading ...
Loading ...