Loading ...
Loading ...
Loading ...
WIRING
12
1
2
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only--not
intended to cover all types of controls
IMPORTANT: Using a full range dimmer
switch (not included) to control fan speed will
cause a loud humming noise from fan. To
reduce the risk of fire or electrical shock, do
NOT use a full range dimmer switch to control
fan speed.
3.
3
1.
Temporarily lift canopy (B) to mounting bracket (C)
to determine which two canopy mounting screws
(J) in mounting bracket (C) align with slotted holes
in canopy (B) and partially loosen these two
canopy mounting screws (J). Remove the other
two canopy mounting screws (J). Now, lift canopy
(B) to mounting bracket (C) again, aligning slotted
holes in canopy (B) with loosened canopy
mounting screws (J) in mounting bracket (C).
Twist canopy (B) clockwise to lock. Re-insert the
two canopy mounting screws (J) that were just
removed and tighten all canopy mounting screws
(J) securely.
FINAL INSTALLATION
1
B
D
J
J
D
B
Downrod
Option
Closemount
Option
2.
Partially insert three blade screws and washers (BB)
to attach one blade arm (G) to a blade (F). Then,
tighten each blade screw and washer (BB), starting
with the one in the middle. Repeat with remaining
blades (F).
Blade Screw x 15
and Washer
Hardware Used
BB
2
BB
F
G
Loading ...
Loading ...
Loading ...