Loading ...
Loading ...
Loading ...
Pull wires up through hole in the middle of the
canopy (B) and attach canopy (B) to motor
housing (D) using the three screws and three lock
washers previously removed.
Temporarily hang fan on the tab on the mounting
bracket (C) using one of the non-slotted holes in
the canopy (B).
4.
3.
CLOSEMOUNT-STYLE FAN MOUNTING
10
D
3
B
D
Remove every other screw and lock washer from
top of motor housing (D).
Remove pin (K), clip (L) and preassembled set
screws and nuts from yoke on motor housing (D).
They are not needed for this installation type.
Tab
B
D
C
4
2a.
2b.
Yoke
2a
D
K
L
Set Screw
and Nut
2b
D
Loading ...
Loading ...
Loading ...