Loading ...
Loading ...
Loading ...
The refrigerator doors may feel different than the ones
you are used too The special door opening/closing
feature makes sure the doors close all the way and are
securely sealed.
When opening and closing the door you will notice a
"stop" position_ If the door is opened past this "stop"
point, the door will remain open to allow you to load and
unload food more easily. When the door is only partially
open it will automatically close,
The resistance you feel at the "stop" position will be
reduced as the door is loaded with food.
)
When the door is only
partially open it wilt
automatically close.
Beyond this "stop" the
door wilt stay open
Some models are equipped with trim kits that allow you
to install door panels. You can order pre-cut black or
white decorator panels from your Sears Service Center,
or you can add wood panels to match your kitchen
cabinets_
PANELS LESS THAN 114" (6 mm) THICK
When installing wood panels less than 1/4" (6 ram) thick,
you need to create a filler panel, such as 1/8" cardboard,
that will fit between the face of the door and the wood
panel, tf you are installing the pre-cut decorator panels,
pre-cut filler panels are included in the kit. The combined
thickness of the decorator or wood panel and the filler
panel should be 1/4" (6 mm)o
3/4" (19 mm) OR RAISED PANEL
A raised panel design screwed or glued to a 1/4"
(6 mm) thick backing, or a 3/4" (19 ram) routed board
can be used.. The raised portion of the panel must be
fabricated to permit clearances of at least 2" (51 mm)
from the handle side for fingertip clearance.
Weight limitations for custom panels:
Fresh Food: 35 lb. (16 kg) max..
Freezer Door: 25 Ibo (11 kg) max°
1/4" (6 mm)
Thick Backing
J
2" (51 ram)
Clearance
Handle Side
Appearance
Panel
3/4" (19 ram)
Refrigerator
Door
Loading ...
Loading ...
Loading ...