Loading ...
Loading ...
Loading ...
Combination Tool
Available on some models only)
A
Stair Cleaning
Use the hose and powered hand tool for stair
cleaning. Clean from bottom to top.
CAUTION-' To avoid personal injury or unnecessary
wear to carpet, and to prevent the cleaner from
falling, always place it at bottom of stairs.
Slide brush to remove_
To replace brushes, align bottom of brush with
grooves (A) on toot. Slide brush into place.
Extra ReachTM Hose
(available at additional cost}
The Extra Reach TM hose provides easier cleaning
of stairs and hard to reach places. Follow the
steps below for attaching and detaching the
Extra Reach TM hose.
/h
fl
Turn cleaner OFF before disconnecting and
connecting hose, Remove hose end From dirt
duct (A), Align end of Extra ReachTM hose with
projections (B) over slots on dirt duct {C)oSlide
hoseinto slots and twist hoseto lock it into
place.
Alignend ofhosewithprqjections[D)overslots
{E} on Extra Reach_ hose,Slide hose into slots
and twist hose tolock it into place_ [Todetach
hose, reverse procedure},
Attach wands or toolsto the other end of hose,
Note: Hose must be connected to dirt duct and
hose tube after removing Extra Reach" hose for
carpet or floor cleaning.
Familiarize yourself with these home maintenance tasks as proper use and care ofyour cleaner will
ensure continued cleaning effectiveness,
Dirt Cup
When to Empty
Empty the dirt cup before the dirt reaches the fill line (A)°
Place the cleaner in the uptight position before removing
the dirt cup-
Disconnect cleaner from electrical outlet. Do not use cleaner
without dirt cup or filters in place,
CAUTION: Very fine materials, such as face powder or
cornstarch, may seal the filter and cause a reduction in
performance. When using the cleaner for this type of dust,
empty the cup and clean the filters often,
Loading ...
Loading ...
Loading ...