Loading ...
Loading ...
Loading ...
8. Applydetergenttoa drysurface,startingatlower
portionofareatobewashedandworkupward,using
long,even,overlappingstrokes.
9. Allowdetergentto"soakin"for3-5minutesbefore
washingandrinsing.Reapplyasneededtoprevent
surfacefromdrying.DONOTallowdetergenttodryon
(preventsstreaking).
IMPORTANT:Youmustflushthedetergentsiphoningsystem
aftereachusebyplacingthefilterintoabucketofclean
water,thenrunthepressurewasherinlowpressurefor1-2
minutes.
PressureWasherRinsing
For Rinsing:
1. Remove soap nozzlefrom nozzle extension.
2. Selectand install desired high pressure nozzle following
instructions How to Use Precision Spray Nozzle System.
3. Keepthe spray gun a safe distance from the areayou
plan to spray.
WARHIHG
/_ spray gun can cause you
Kickbackfrom to fall.
. Operatepressurewasherfrom a stablesurface.
• Beextremelycarefulif youmust usethe pressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
. Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjury whenspraygun kicks back.
4. Apply a high pressure spray to a small area, then check
the surface for damage.If no damage is found, it is okay
to continue cleaning.
Start at the top of the areato be rinsed, working down
with same overlapping strokes as you used for washing
and applying detergent.
,
Cleaning DetergentSiphoning Tube
If you used the clear detergent siphoning tube, you must
flush it with clean water before stopping the engine.
1. Placedetergent siphoning tube/filter in a bucket full of
clean water.
2. Remove high pressure nozzlefrom nozzle extension.
3. Selectand install a soap nozzle following instructions
How to Use PrecisionSprayTM Nozzle System.
4. Flushfor 1-2 minutes.
5. Shut off engine following instructions How to Stop
Pressure Washerand turn off water supply.
6. ALWAYS point spray gun in a safe direction, push red
button and squeezespray gun trigger to release retained
high water pressure.
WARHIHG
The high pressurestream of water that this
equipment produces can cut through skin and its
_ nderlying tissues, leadingto serious injury and
)ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnectedto pumpandspraygun
whilesystemis pressurized.
. ALWAYSpointspraygunin safedirectionpressred buttonand
squeezesprayguntrigger,to releasehigh pressure,everytime
you stopengine.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
Automatic Cool Down System (Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures above
125°F. The system engagesto cool the pump by discharging
the warm water onto the ground.
15
Loading ...
Loading ...
Loading ...