Loading ...
Loading ...
Loading ...
* Select magenta jet soap PrecisionSprayTM nozzleto
launch soap to second story siding and windows.
Select black fan soap PrecisionSprayTM nozzlefor
generalcleaning. Greatfor applying soap to
vehicles, boats, driveways, decks, and patios.
FAN SOAP
3. Pull backon collar, insert new PrecisionSprayTM nozzle
and releasecollar. Tug on nozzleto makesure it is securely
in place.
UsageTips
* For most effective cleaning, keep PrecisionSprayTM nozzle
from 8 to 24 inches (20 to 61 cm) away from cleaning
surface.
* If you get PrecisionSprayTM nozzletoo close, especially
using a high pressure nozzle,you may damage surface
being cleaned.
, DO NOTget closer than 6 inches (15 cm) when cleaning
tires.
2-IN-1 SIPHONSYSTEM
Cleaning and Applying Detergent with
the Project Pro® PerfectMix TM Siphon
CAUTIOH
Chemicalscan cause bodily injury, and/or property
damage.
NEVERusecausticliquidwith pressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.
To apply undiluteddetergent using
the blue PerfectMixTM siphen,
felJow these steps:
1. Review use of PrecisionSprayTM nozzles.
2. Attach PerfectMixTM siphon hose to
pump and PerfectMixTM concentrate
bottle.
3. Make sure fan soap (black) or jet soap
nozzle(magenta)is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles (Cyan,Orangeor Red).
4. Makesure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
NOTICE
You must attach all hosesbefore you start the engine.
Startingthe enginewithoutall the hosesconnectedandwithout
thewaterturnedONwill damagethe pump.
Damageto equipmentresultingfrom failureto followthis
instructionwill void warranty.
5. Start engine following instructions How to Start Your
Pressure Washer.
6. Placethreaded end of detergent siphoning tube into
detergentcontainer. Tighten by hand.
7. Apply detergentto a dry surface, starting at lower
portion of areato be washed and work upward, using
long, even, overlapping strokes.
8. Allow detergent to "soak in" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surface from drying. DO NOTallow detergent to dry on
(prevents streaking).
Cleaning and Applying Detergent with
the Standard Clear Siphon
To apply diluted detergent usingthe
standard cJearsiphontube,
felJew these steps:
1. Review use of
PrecisionSprayTM nozzles.
2. Attach clear siphon hose to pump.
3. Mix detergent solution as required by job.
4. Placesmall filter end of clear siphoning tube into
container with diluted solution as described above.
NOTICE
Contact with the hot muffler can damage detergent
siphoning tube.
Wheninsertingthe siphoninto a detergentsolutionbottle,
routethe tubeso asto keepit from inadvertentlycontactingthe
hot muffler.
NOTE:Makesure the filter is fully submerged in fluid while
applying solution.
5. Makesure fan soap (black) or jet soap nozzle(magenta)
is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles (Cyan,Orangeor Red).
6. Makesure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
7. Start engine following instructions How to Start Your
Pressure Washer.
14
Loading ...
Loading ...
Loading ...