Loading ...
Loading ...
Loading ...
"MAINTENANCE SCHEDULE _/_/_'_/:'_/_,/1_
AS YOU COMPLETE _,_¢'_ _'_ _q_" _',_ _._ _
Check Brake Operation _ i tl_
Check Tire PreP,sure I1_ i I_
i CheCk Operator Presence and
T InterlOCk Systems V'
R Check for Loose Fasteners _ 1_7
cA Sharpen/Rep4ace MOWer Blades rl_'4
T Lubrication Chart _ I1_
O CheCk Battery Level
R Clean Battery and Terminals _
ChqJCk Trar_axle Cooling _je
Adjust IBlacNJBelt(s) Tension _s
Adjust Motion Drive Belt(s) Tension _s
CheCk Errgine Oil Level I_ It_
Change Engine Oil 11_1,2,_ I_
E Clean Air Filter ll_z
Clean Air Screen 1_2
iG ' Inspect Muff er/Bp_ k At'ester I_ I
Replace OII Filter (If equipped) 1_12
N' Clean Engine Cooling Fins ! _=
i Replace Spark Plug i ll_ I1_
Replace Air Filter Paper Cartridge _1_=
! Replace Fuel Filter
Change more o_en when opera_ng under a hea W Ioa_ or _n hbgh ambient zer_peratu_ea S. _ _ubpped wl_ adjustable ey_em
2 - Se_e more o_en when o_'_llng m dbrt'/or dusty co_diZ_n_ 6 NOZ r*_ulr_d _ _ped W_ ma_na_.f_e ba_ee/,
3. Jr _uk_p_ w_h oil filter, chenge oil every 5O hour=¸ 7. T_ght_n fron_ e_lo pk,ot boll _ 3_ _._ m_x_mum
4. Ropl_e blado_ more often when mowing in sandy SO_ DO noZoverbehten
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to propedy maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades end belts for wear, A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level
2. Check brake operation.
3, Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5, Check for loose fasteners,
LUBRICATION CHART
® TieRodBallJoints
Spindle
Zerk Zerk
_Fmnt Wheel
Bearing
Zerk
Bearing Zerk
Gear
Teeth
_Check/
Add
Transaxle
Fluid
SAE 30 or 10w30 motor oil
General Purpose Grease
(_ Refer to Maintenance eENGINE" Section
® Spray silicone tubriant (Move Soots to
Lubricate)
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
18sparingly.
Loading ...
Loading ...
Loading ...