Loading ...
Loading ...
Loading ...
8
SEM10 (fig.
31)
SEM10 product has been designed to be installed under the kitchen cabinet, corresponding to
the downdraft lower air outlet . This product can work only if it is used in combination with
a
downdraft
equipped with external motor,
manufactured
by the same producer.
The appliance has been designed to suck vapours and odours in an optimal and almost
noi
-
seless way . We recommend to use the product only in
FILTERING
MODE and to use a constant
diameter piping of 150mm or similar
sections.
We recommend to use piping without elbows, as they negatively affect the performance of the
appliance.
Installation
procedure: place the appliance under the
downdraft
, corresponding to the air
out
-
let, as shown in (fig.
32).
All fittings are supplied with the appliance, along with a rectangular pipe that connects the
downdraft
to the SEM10 product
The appliance air outlet shall be connected to the cabinet, in such a way that the air sucked in
the kitchen can be recirculated back into the room. Piping to be connected to the SEM10
pro
-
duct air outlet are not supplied with the appliance.
It is possible to direct the product air outlet according to your installation requirements, by
rotating the air outlet flange as shown in (fig.
33).
Loading ...
Loading ...
Loading ...