Loading ...
Loading ...
Loading ...
7
SEM 7 (dis.
27)
Warning!
The remote fitted exhausting group (external motor) is built in class I plate, therefore it
needs
the earth connection.
The appliance was designed to exhaust odors and vapors in the best way. The appliance is to
be installed on the outside wall of the house and connected to the cooker-hood which is in the
kitchen (fig.
28)
Installation:
the mounting of the appliance is to be made by qualified technicians. Using the appropriate
drilling
jig (fig. 29)
drill
all the holes marked on it into the external wall, by paying attention not
to damage water pipes or power lines. The holes on the wall are to be drilled with a 8 mm.
bit.
Insert, step by step, the following parts in the holes drilled:
-
the corresponding plastic dowels supplied (fig.
29)
-
the two telescopic pipes in the hole of 200
mm.
-
the plastic pipe of 40 mm. diameter.
Before leaning the appliance against the wall, please remove the stainless steel carter using the
8 perimetrical screws (fig. 30), then insert the supply cord in the plastic pipe. Fix the appliance
without the stainless steel external body, which was
previously
removed from the motor
block,
by matching the holes of the motor block with the holes on the wall. Tighten with the screws
supplied.
Connection of the
pipes:
the appliance is endowed with an air entrance to be connected with the telescopic pipes and an
air outlet. After fixing the appliance on the external wall, connect the two telescopic pipes
(fig.
12C), which are placed inside the wall, with the cooker-hood through the flexible
pipes.
The fixing operations have to be carried out by using suitable metallic tools (pipes and tools
have to be supplied by the installers).
Electrical connection to the
hood:
the unit is supplied
with
a pipe 7 meters long.
After
having let the cable pass through the plastic
pipe (fig. 12E) placed in the wall (fig. 12D), placed it closed to the unit and connect the 6 poles
connector (Fig. 12E) and the 2 poles connector (Fig.
12G).
In order to avoid water infiltrations, please apply silicone on the product perimeter, close to
the wall.
Installation of the external carter:
mount the aesthetic carter making sure that the grill will match with the block motor air outlet
(dis.
30).
Loading ...
Loading ...
Loading ...