Loading ...
Loading ...
Loading ...
6
SEM 5
(fig.21)
Warning! The remote fitted exhausting group (external motor) is built in class II
(see
symbol on the rating plate), therefore it must not be
earthed.
This model has been
specifically
studied to suction vapours and odours without noise.It should
be installed outside and connected to the hood in the kitchen (fig.
22).
Roof installation: make a 22 x 22 cm square opening on the roof, and then insert the lower part
of the remote fitted exhausting motor (fig.
23).
Put the two brackets as shown in fig 24A and mark the holes you are going to
drill
on the lower
part of the remote fitted exhausting motor.
Make all the holes, and then fasten securely.
Insert the pipe connecting the hood outlet line with the upper part of the remote fitted
extrac
-
tion motor (fig.25A); the pipe should pass into the lower part of the remote fitted
exhausting
motor (fig.
25).
Fix the pipe to the upper part of the remote fitted exhausting motor with a metal hose clamp.
Assembly
the upper and the lower part of the remote
fitted
exhausting motor using the 8 screws
provided
(fig.25B).
Electrical connection of the hood: the appliance is equipped with a 7m electrical cable.
Con
-
nect it to the six-pin connection of the appliance in the kitchen.
Loading ...
Loading ...
Loading ...