Loading ...
Loading ...
Loading ...
9
Cleaning & Care:
Clean and maintain the appliance regularly to ensure the quality of coffee and the life of the
appliance.
CAUTION: Always unplug the unit and let it cool down completely before cleaning. To protect
against electrical shock, do not immerse the cord, plug or unit in water or liquid.
1. Clean all detachable parts with warm water. Do not clean with alcohol or solvent cleaners.
NOTE: Remove any coffee grounds or residue inside the filter before rinsing it under water.
2. Wipe the external surfaces of the unit with a soft, damp cloth.
3. Dry all parts thoroughly.
4. Replace all parts before attempting to use the appliance again.
5. If the appliance is not to be used for a long time, clean and thoroughly dry all the detachable
components before storage.
Removing Mineral Deposits:
To keep your appliance operating eciently and retain optimum taste, you should remove mineral
deposits left by the water every 2-3 months.
1. Fill the tank with water and de-scaler to the MAX level. The proportion of water to de-scaler
is 4:1. Refer to the instructions that come with the de-scaling product. Please use household
de-scaler. Alternatively use citric acid, in the proportions of one hundred parts of water to three
parts of citric acid.
2. Follow the instruction section for “Making Espresso Coffee”; put the funnel (without coffee) and
carafe in place.
3. Turn the steam control to the position, the indicator will be illuminated, and make two
cups of coffee (about 2oz).
4. Turn the steam control to the position and wait for 5 seconds.
5. Turn the steam control to the position and allow the appliance to create steam for about
2 minutes.
6. Turn the steam knob to the position.
7. Leave the solution to rest inside the unit at least 15 minutes.
8. Restart the unit and repeat the steps of 4-6 at least 3 times.
9. When this process is complete, turn the steam control to the position and allow the unit
to operate until the water tank is completely empty of descaling solution.
10. Finally, rinse the tank by operating the appliance with water only (at MAX level). Repeat steps
4-6 three times (it is not necessary to wait for the 15 minutes in step 7) until there is no water
left in the tank.
Loading ...
Loading ...
Loading ...