Loading ...
Loading ...
Loading ...
6
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this information
for future reference.
1. Remove the appliance from the packaging.
2. Check all components are present.
3. Clean all the detachable components according to the following section of ‘CLEANING AND
CARE’. Then reassemble them completely.
4. Ensure the filter is in position. Place the carafe on the removable shelf.
5. Prior to initial use, operate the appliance for the first time without coffee, filling the carafe
with water to the maximum mark. Refer to the ‘Using Your Appliance’ section for instructions.
Repeat this process 2-3 times.
6. Your appliance is now ready for normal use.
7. Dispose of the packaging in a responsible manner.
Using Your Appliance:
NOTE: If the appliance is not turned to the OFF position but left at the coffee or steam positions, the
unit will power off automatically after 25 minutes.
Making Espresso Coffee:
CAUTION: Before pouring the water into the water tank, ensure the power cord is unplugged from
the power outlet and the steam control is in the OFF position.
1. Remove the water tank cover by turning it anti-clockwise.
2. Using the carafe, fill the water tank to above the minimum line but DO NOT exceed the
maximum capacity line.
3. Replace the tank cover by turning it clockwise until it locks into position.
4. Put the filter into the portafilter and add the required amount of coffee powder, then press the
coffee powder tightly with the tamper.
NOTE: The maximum capacity the carafe will hold is 4 shots of espresso.
NOTE:Always use a coarse coffee powder suitable for these appliances. Fine coffee powder is not
suitable.
5. Make sure the portafilter notches align with the grooves in the appliance, then insert the
portafilter into the ‘INSERT’ position. Fix the portafilter into the appliance firmly by turning
it anti-clockwise until it is locked in the ‘LOCK’ position.
6. Place the carafe on the drip tray.
7. Plug the power cord into the mains outlet (ensure that the control is set to the OFF
position).
8. Turn the steam control to the position. The indicator will illuminate. Wait for
approximately 2 minutes, when coffee will begin to flow out.
CAUTION: Do not leave the coffee maker unattended whilst in operation.
9. Once the desired amount of coffee is made, turn the steam control to the position
to release the residual steam pressure in the tank. The indicator light will go off and the
appliance will stop. The coffee is now ready.
10. Remove the carafe and turn the steam control knob to the position.
CAUTION: When pouring, be careful not to angle the carafe beyond a safe angle. We recommend
the inclination is of no more than 45 degrees from the vertical position. Pour the coffee slowly,
otherwise the coffee may splash out and cause scalding.
11. Before removing the filter or opening the water tank cover, make sure the residual steam
pressure in the tank has been released. With the steam control at the position and once
pressure has released and the unit has cooled down the filter can be removed and the water
tank cover opened. To open the portafilter, turn it clockwise, remove the filter and empty
the coffee residue out by pressing the press bar. Once fully cooled, rinse under running
water. When reassembling the filter turn over the press bar to the original position.
Loading ...
Loading ...
Loading ...