Loading ...
Loading ...
Loading ...
[ ENGLISH ]
Initial Setting : System Menu Setting
+ The Demonstration function may only be used in the <Camera> mode without a tape
inserted in the Camcorder. _,page 19
+ Before you begin: Make sure that there is no tape inserted in the Camcorder. _,page 32
+ Demonstration automatically shows you the major functions that are included with your
Camcorder so that you may use them more easily.
+ The Demonstration operates repeatedly until the Demonstration mode is switched Off.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
• The menu list will appear.
4. Move the [Zoom] lever up or down to select <System>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <Demonstration>, then press the
[OK] button.
6. Move the [Zoom] lever up or down to select <On>, then press the [OK] button.
7. Press the [MENU] button.
• The Demonstration will begin.
8. To quit the Demonstration, press the [MENU] button.
,English
i
i\_Move _Select _Ex[t
r_2_ ctock Set
D Remote
[ Notes ] _'/_ I
• The Demonstration function is automatically activated when the Camcorder is left idle for I
more than 10 minutes after switching to the <Camera> mode (if no tape is inserted in the I
Camcorder).
• If you press other buttons (FADE, MF/AF, PHOTO, EASY.Q) during the Demonstration I
mode, the demonstration stops temporarily and resumes 10 minutes later if you do not
rate any other functions.
Loading ...
Loading ...
Loading ...