Loading ...
Loading ...
Loading ...
[ ENGLISH ]
Troubleshooting
+ Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Informs that,,, ' Action
slow the Battery pack is almost discharged Change to a charged one
Tape end! slow When the remaining time on the tape
is about 2 minutes Prepare a new one
Tape end! no the tape reached its end Change to a new one
No Tape! slow there is no tape in Camcorder Insert a tape
If you want to record, release
Protection! slow the tape is protected from recording the protection
A_D slow the Camcorder has some mechanical 1 E}ect the tape
fault 2 Set to OFR
L 3. Detach the battenz
C 4. Reattach the battery
R * _unresolvedcontactyour IocaJ
samsung servicecenter
slow moisture condensation has formed in see below
the Camcorder
Moisture Condensation
• If the Camcorder is brought directly from a cold place to a warm place, moisture may condense inside the Camcorder,
on the surface of the tape, or on the lens. in this condition, the tape may stick to the head drum and be damaged or the
unit may not operate correctly.
To prevent possible damage under these circumstances, the Camcorder is fitted with a moisture sensor.
• If there is moisture inside the Camcorder, _ (DEW) is displayed, if this happens, none of the functions except
cassette ejection will work.
Open the cassette compartment and remove the Battery.
Leave the Camcorder for at least two hours in a dry warm room.
A
Loading ...
Loading ...
Loading ...