Loading ...
Loading ...
Loading ...
(71,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
WARNING
Before installing a booster seat/
cushion, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Adjust the head restraint as follows.
For booster seat:
Raise the head restraint to the extended
position. If the booster seat still makes
contact, remove the head restraint. For
details, refer to “Head Restraint Adjust-
ment” �P45.
CAUTION
Store the head restraint that has
been removed in the trunk (Legacy)
or cargo area (Outback/Subaru
Outback Wilderness). Do not place
the head restraint in the passenger
compartment to prevent it from
being thrown around in the passen-
ger compartment in a sudden stop
or a sharp turn.
For booster cushion:
Raise the head restraint to the extended
position. Do not remove the head restraint.
2. For Outback/Subaru Outback
Wilderness models, adjust the seatback
to the upright position.
3. Place the booster seat/cushion in the
rear seating position and sit the child on it.
The child should sit well back on the
booster seat/cushion.
4. If there is a gap between the booster
seat/cushion and the seatback, adjust the
seatback angle until good contact is
achieved.
5. Run the lap and shoulder belt through
or around the booster seat/cushion and
the child following the instructions pro-
vided by its manufacturer. For booster
seat/cushion with a belt guide, use the
seatbelt through the belt guide.
6. Insert the tongue plate into the buckle
until you hear a click. Take care not to twist
the seatbelt.
Make sure the shoulder belt is positioned
across the center of child’s shoulder and
that the lap belt is positioned as low as
possible on the child’s hips.
7. To remove the booster seat/cushion,
press the release button on the seatbelt
– CONTINUED –
Child Restraint Systems
69
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...