Loading ...
Loading ...
Loading ...
(467,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
3. Insert the safety pin through the pro-
vided hole on the hitch pin securely.
4. Check the ball mount assembly by
pulling on it to make sure it does not come
off the hitch receiver.
1) Hitch ball installation point
2) Hooks for safety chains
5. Use only a hitch ball that is appropriate
for the ball mount and your trailer. The
hitch ball must be securely installed on the
ball mount.
6. Connect your trailer to the hitch ball.
7. Connect the trailer and the hitch with
safety chains that will hold the trailer’s
maximum gross weight. In case the trailer
hitch connector or hitch ball should break
or become disconnected, the trailer could
get loose and create a traffic safety
hazard. For safety, always connect the
towing vehicle and trailer with trailer safety
chains.
Two chains should be used in total, one to
the right side and the other to the left side
trailer tongue. Pass the chains crossing
each other under the trailer tongue to
prevent the trailer from dropping onto the
ground in case the trailer tongue should
disconnect from the hitch ball. Allow
sufficient slack in the chains taking tight
turn situations into account; however, be
careful not to let them drag on the ground.
WARNING
. For safety, always connect the
towing vehicle and trailer with
safety chains.
. Do not connect safety chains to
any part of the vehicle other than
the safety chain hooks.
. Be sure to check the hitch pin and
safety pin for positive locking
placement before towing a trailer.
If the ball mount comes off the
hitch receiver, the trailer could
get loose and create a traffic
safety hazard.
– CONTINUED –
Trailer Hitch (Outback/Subaru Outback Wilderness – If Equipped)
465
8
Driving Tips
Loading ...
Loading ...
Loading ...