Loading ...
Loading ...
Loading ...
(258,1)
北米Model "A2620BE-B" EDITED: 2022/ 6/ 24
Dual 7.0-inch display models
1. Touch “Valet Mode” or select OFF
(11.6-inch display models).
Touch “Deactivate” (dual 7.0-inch display
models).
2. Enter the passcode.
3. Touch “OK”.
NOTE
If you enter the passcode incorrectly
three times in a row when setting or
canceling valet mode, a message
prompting you to contact a SUBARU
dealer will be displayed, but it is still
possible to enter the passcode even
after the fourth attempt.
If you have forgotten your passcode,
consult your SUBARU dealer.
3-11. Light Control Switch
s03ah
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the light control switch
is turned to the off position. If the
vehicle is left unattended for a
long time with the light control
switch set to a position other
than the off position, the battery
may be discharged.
Models with “keyless access with
push-button start system”:
The light control switch operates when the
push-button ignition switch is in the “ACC”
or “ON” position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without “keyless access with
push-button start system”:
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be oper-
ated (except auto on/off headlights),
even under the following conditions.
. When the push-button ignition
switch is turned off (models with “key-
less access with push-button start
system”)
. When the key is not inserted into the
ignition switch (models without “key-
less access with push-button start
system”)
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform
the driver that the lights are illuminated.
Light Control Switch
256
Loading ...
Loading ...
Loading ...