Loading ...
Loading ...
Loading ...
Bef!)re You Call For Service
Problem
Oven will not A fuse in your home
start may be blown or the
circuit breaker tripped.
Power surge.
• Replace fllse or reset circuit breaker.
• Unplug the rnicrowave oven, then Dluo
, • o
it back in.
Plug not fully inserted • Make sure the 3-1)rorl , plug on tile
("9 <
into wall outlet, oven is hilly inserted into wall outlet.
"PLEASE INSERT Probe has been • Insert the probe properly into the
PROBE" appears forgotten or not oven wall outlet.
on display inserted properly.
"SENSOR ERROR"
appears on display
When using a Sensor
feature, the door was
opened before steam
could be detected.
Steam was not detected
in maximum amount of
time.
The cooktop light is
located below the oven
floor. When the light
is on. the heat it
produces may make the
oven floor get warm.
Floor of the oven is
warm, even when
the oven has not
been used
• Do not open door until steam is
sensed and time is shown counting
(tox_a-_on display,
• Use Time Cook to heat for more time.
• Tiffs is normal.
"BAD PROBE" The probe has not been • Insert tile probe properly into tl_e
appears on display completely inserted into oven wall outlet.
the oven wall outlet.
The probe is defective. • Replace the probe.
"tOCKEO" appears The control has been • Press and hold (;IJ_IAR/()FF ti)r
on display locked, about 3 seconds to uMock the control.
Food amount too Sensor Reheat is for • Use Time Cook lot large amounts
large for Sensor single servings of ot _ood.
Reheat recommended foods.
45
Loading ...
Loading ...
Loading ...