Loading ...
Loading ...
Loading ...
W415-1366 / A / 04.06.17
22
EN
7.5 REPLACEMENT BLOWER INSTALLATION
!
WARNING
RISK OF FIRE AND ELECTRICAL SHOCK.
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THIS APPLIANCE.
USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH
THIS APPLIANCE. USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS
COMPONENTS, VENTING COMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL
VOID THE WARRANTY AND CERTIFICATION.
ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE
APPLIANCE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER
CORD BENEATH THE APPLIANCE.
THE WIRE HARNESS PROVIDED IN THE BLOWER KIT IS A UNIVERSAL HARNESS. WHEN
INSTALLED, ENSURE THAT ANY EXCESS WIRE IS CONTAINED, PREVENTING IT FROM MAKING
CONTACT WITH MOVING OR HOT OBJECTS.
51.5
W415-1366 / 10.15.14
A.
B.
C.
D.
E.
and replace.
F.
into the clip and up
at the other end. The
pad.
G. . Secure to the
H.
door.
I.
Because the blower is thermally activated, when turned on, it
will automatically start approximately 5-15 minutes after lighting
the appliance and will run for approximately 30-45 minutes after
the appliance has been turned off. Use of the fan increases the
output of heat.
Drywall dust will penetrate into the blower bearings causing
irreparable damage and must be prevented from coming into
contact with the blower or its compartment. Any damage resulting
from this condition is not covered by the warranty policy.
black
white
red
SPEED
CONTROL
SWITCH
BLOWER
THERMAL
SWITCH
BLOWER ACCESS DOOR
BLOWER
WIRES
THERMODISC
BRACKET
ASSEMBLY
A
B
C
Loading ...
Loading ...
Loading ...