Loading ...
Loading ...
Loading ...
20308011
25
VFC Vent Free Fireplace System
LOG AND MEDIA PLACEMENT
LOG PLACEMENT (VFC24L AND VFC32L
ONLY)
Before you begin — This unit is supplied with six (6) re-
fractory cement logs. Do not handle these logs with your
bare hands. Always wear gloves. After handling the logs,
wash your hands gently with soap and water.
1. Place bottom right front log #1 on right pin located on
burner. Rear of log will make slight contact with the front
grate slot bracket. Figure 23
CAUTION
DO NOT sprinkle volcanic rock on the logs
or around the pilot or the main burner. This
may cause sooting. Only place volcanic
rock on the fl oor of the fi replace.
During initial operation of the new heater,
burning logs will give off a paper burning
smell and orange fl ames will be present.
Simply open the windows for a few hours
to vent the odor.
2. Place the right rear log #2 behind #1 locking the two
logs together with the male notch into the back of log
#1. Figure 24
3. Place the middle rear log #3 with the center log placed
behind the right fl ame bracket. T he rear log will rest on
the back log support. Figure 25
4. Place the left front log #4 on the front left pin located
on the burner. Left front edge of the log will make slight
contact with the front grate slot bracket. Figure 26
Figure 23
Figure 24
Figure 25
Figure 26
Loading ...
Loading ...
Loading ...