Loading ...
Loading ...
Loading ...
22. Assemble shut off arm and shut off arm extension.
See Figure 20.
24. Reinstall ice maker into ice box.
25. Reconnect harness to refrigerator.
26. Reinstall harness cover.
27. Be sure ice maker switch is turned on.
28. Reinstall ice bucket.
29. Replace all parts and panels.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
30. Plug in refrigerator or reconnect power.
31. Check ice maker operation through normal service
procedures.
FIGURE20
23. Install shut off arm assembly and fill cup insert onto new ice
maker assembly as shown.
NOTE: Push one end of the shut off arm assembly into module
and guide other end into lower hole next to fill cup. See Figure 21.
FIGURE21
©Whirlpool Corporation 2012
(All Rights Reserved) 4 W10477229B