Loading ...
Loading ...
Loading ...
For Interior Model
(Case 1)
"_ Connecting to water supply line
- Shut off the main water supply line and turn the Ice maker to
the off position.
- Locate the nearest cold drinking water line.
- Follow the instructions in the ice maker installation kit.
1. Cold Water line
2. Pipe Clamp.
3.Copper (or Plastic) line
4.Compression Nut
&Compression Sleeve
6.Shut Off Valve
7.Packing Nut.
6 5 4
Connect the water line to the refrigerator
Slip the compression nut and plastic ferrule
through the plastic tube.
After inserting the sleeve, tighten the compres-
sion nut onto 1/4" compression fitting(union).
@ Do n0t0vertighten thec0mPressi0 n
NOTE nut.....................
- Slip the compression ferrule and nut on cop-
per (or plastic) tubing as shown.
Tighten the comperssion nut onto the com-
pression fitting(union).
- Turn water on and check for any leakege.
|
/'_CompressionaUtFerrule
.' Sleeve
/
Compression fitting
_ ,"; Ferrule
Compression Nut
",, _.o°°"
Waterline must be connected to drinkable water only
NOTE
(Case 2)
":< Check the water supply line
\'7
Connect the water pipe with coupler and tap.
- Close the main water tap.
- Connect coupler "A" to the tap.
- Every join should be protected with sealing tape.
The water line must be connect-
ed to the cold water piRe. I
If it is connected to the hot I
water pipe, it may cause the puri- I
tier to malfunction. J
COUPLER"A"
If the c0uple r does not fit on th e curren t tap, go
th e nearest auth0rised service dealer and purchase
the right couplers fittings,
TAP
28
Loading ...
Loading ...
Loading ...