Loading ...
Loading ...
Loading ...
2727
FUNCTIONING OF THE DOUBLE
COOKING ZONE
The double cooking zone consists of two
circuits, which may be used in the following
modes:
Reduced cooking zone: only the rst
heating unit is switched ON.
Extended cooking zone: the rst
and second heating circuits are both
switched ON.
Turn on the cooking zone as described in
the section: “Power Ignition and Adjustment
of a Cooking Zone”; only the rst heating
unit will switch on.
Press the key
(front left cooking zone
display key) to switch on the second circuit
(the indicator light above the display lights
up to indicate the operation of both zones),
then set the desired power level by using
the keys and .
To turn o󰀨 the second heating circuit press
the key
(the indicator light above the
display will go out).
AFTERHEAT IN COOKING ZONE/S
When switching o󰀨 a cooking zone (power
level
0 ”), if the temperature of the zone
is too warm to be touched the display will
show “h”.
Avoid touching the hob surface over the
cooking area. Please pay special attention
to children.
It is still possible to start cooking again; just
set the required power level.
Whenever the cooktop is switched o󰀨, the
residual heat symbol
h
is replaced by
H ”.
H ” or
h
is turned OFF when the cooking
zone temperature drops below 65 °C.
Loading ...
Loading ...
Loading ...