Loading ...
Loading ...
Loading ...
28
Caring for your clothes washer
When you have finished the cycle
Turn off the taps to prevent the chance of flooding should
a hose burst.
Unplug the machine from the wall socket.
Cleaning your FabricSmart™
Before you start cleaning your FabricSmart™ washer,
ensure that it is turned off at the wall.
Use a soft damp cloth and wipe dry. Do not use chemical
or scouring cleaners as they can damage the paint and
plastic surfaces. Clean the fabric softener dispenser
regularly using warm soapy water.
You can remove the lid for cleaning. Open the lid fully,
grasp the lid on both sides. Lift in an upward motion, as
shown to the right. To replace the lid, hold the lid vertically
and align both hinges before slotting back into place.
To remove the agitator, remove the fabric softener
dispenser and unscrew the nut down the centre of the
agitator by turning anti-clockwise. The agitator must be
fully pushed on to the shaft when refitting. Tighten the nut
firmly by hand. Ensure the agitator is not loose.
Important!
The agitator must be fully pushed onto the shaft when refitting.
Tighten the plastic nut firmly by hand. Ensure the agitator is not loose.
Cleaning the inside of your washer
If you use fabric softener or only do cold water washes, it is important that you occasionally
clean the inside of your machine. We recommend using the BOWL CLEAN cycle 2 – 4 times a year
and suggest that you do not wash clothes during this cycle.
1
Add about 2 cups of a powdered detergent.
2
Touch , select LIFESTYLES.
3
Select EXTRAS.
4
Select BOWL CLEAN (refer to page 22).
Automatic lint system
Your FabricSmart™ has a self cleaning lint disposal system. It automatically separates the lint from
the wash water as it washes. The lint becomes trapped between the inner and outer bowls and is
flushed out at the end of the wash.
Fig.30 Removing the lid
Loading ...
Loading ...
Loading ...