Loading ...
Loading ...
Loading ...
17
Adjusting the wash settings
Default Rinse
This menu changes the rinse option that is automatically selected when you first turn your
machine on. Spray and Deep is the default rinse. You may wish to change the type of rinse
selected for a number of reasons. If you have a problem with impurities in your water supply you
may get a better wash if you change the rinse option to two deep rinses. If you want to conserve
water you could change the rinse option to a single deep rinse or a shower rinse.
Access the SETTINGS menu (refer to page 16).
Select DEFAULT RINSE. Select the rinse option you prefer.
Spray and Deep = Spray rinse followed by 1 deep rinse
Single Deep = Short spin followed by 1 deep rinse
Double Deep = Two deep rinses
Shower = Shower rinse
Shower rinse alternately showers the clothes with water and spins them to remove the sudsy
water. It is not designed to be used with fabric softener. A shower rinse does not include a deep
rinse therefore cannot dispense fabric softener correctly.
Easy Iron Spin Speed
The Easy Iron Fabric Care option is designed with a slow spin speed (330 rpm). However, if you
wish to have a faster spin speed you can program the Easy Iron cycle to have a medium spin speed
(670 rpm).
Access the SETTINGS menu (refer to page 16).
Select EASY IRON SPIN SPEED.
Select Medium Spin Speed.
Out Of Balance Recovery
When your washer is spinning it can sense when the wash load is out of balance and will stop
and retry spinning up to three times. If the machine still senses an unbalanced load there are
two options the machine can take.
Automatic recovery action
Your washer will try to automatically correct the out of balance load. It will fill with water and
agitate to redistribute the load before trying to spin up again.
Machine stops action
Your washer will stop, give a short burst of beeps every five seconds, and display a message
to let you
know to redistribute the load more evenly yourself (use this option if you wish to
conserve water).
Loading ...
Loading ...
Loading ...