Loading ...
Loading ...
Loading ...
8
WWW.VINOTEMP.COM
!
!
OPERATING DISHWASHER
16. Start / Cancel
Open the door, select a wash cycle you desire, and
the indicator light will turn on. Press the
Start/Cancel button and close the door within 4
seconds, then the selected program light begins to
blink and the cycle progress indicator on the control
panel will light on, the washing cycle is then
running.
If you close the door more than 4 seconds after
pressing the Start/Cancel button, the cycle will
pause and not run.
To cancel a running cycle, open the door and press
the Start/Cancel button for 3 seconds, then the
dishwasher will drain the water for 60 seconds and
the screen will display the time "60". After the drain,
you can select the desired cycle.
When you want to load more dishes or pause the
dishwasher while it is already running, make sure
to open the door slowly and carefully as there is a
possibility of injury by hot steam from inside the
dishwasher. You can add more dishes before the
main wash starts.
Open the door and check the detergent dispenser.
If the detergent dispenser is still closed, you can
add items. To achieve the best washing
experience, it’s strongly recommended that all
dishes be loaded before washing program begins.
14. Delay
To delay the start of a selected cycle, open the
door, then press the Delay Start pad until the
desired delay time shows in the LED display
screen. It will allow you to start your dishwasher for
1 to 24 hours delay. Press the Start/Cancel pad
once, after that, you should close the door within 4
seconds, then the delay is running.
If you open the door during the delay, you should
press the Start/Cancel pad, then close the door
within 4 seconds, the delay will run again.
To cancel the Delay Start option and begin the
cycle, before the delay period is over press the
Start/Cancel pad for 3 seconds.
15. Display Window
To display the remained hours and minutes of the
running cycle, delay hours and error codes etc.
17. Rinse Aid Indicator Light
Turns on when the dishwasher needs to add Rinse
aid.
18. Sani Rinse Indicator Light
If a cycle with the sanitize function is finished, the
sanitized indicator light turns on. If you open the
door, it will turn off after 30 seconds.
19. Clean Indicator Light
Turns on after a cycle finished. If you open the
door, it will turn off after 30 seconds.
CYCLE PROGRESS INDICATOR
Located on ride side of the front of the
dishwasher, these lights indicate how far
along is the current wash cycle while the
dishwasher is running.
Loading ...
Loading ...
Loading ...