Loading ...
Loading ...
Loading ...
19
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
Troubleshooting
Problem
Possible cause
Solution
Detergent
dispenser will not
shut
Improper operation of the detergent cover
Add the detergent and rinse aid
as indicated by the manual
Water remains in the
dishwasher
Previous cycle has not finished or has
been interrupted
Select the proper cycle as introduced
by the manual
Dishwasher does
not drain properly
Drain is clogged
Check the air gap
Make sure the disposer is empty if the
dishwasher is connected to the
disposer
Drain hose is kinked
Make sure the drain hose is
properly connected to the sink
Suds in the tub
Improper detergent is used
Make sure to use only the
automatic dishwasher detergent
Dishwasher leaks
Excessive suds caused by using the
improper detergent
Make sure to use only the
automatic dishwasher detergent
Dishwasher is not level
Leveling the dishwasher (see
the installation manual)
Black or gray
marks on dishes
Aluminum utensils have rubbed against
dishes
Chose a higher cycle
Make sure the inlet water is no less than
120
°F
Stained tub interior
Coffee and tea soil
Using a spot cleaner to remove the soil
Reddish stain
Some tomato food will cause this. Use
the rinse only cycle right after loading,
this will decrease the staining
Noises
Detergent cup opening\Drain pump sound
This is normal
A hard object has entered the wash module.
When
the object is ground up, the sound
should stop.
If the noise persists after a complete
cycle, call for service.
Dishwasher won't fill
Water valve is turn off
Check if the water valve is turn on
Door latch may not be properly seated
Make sure the door is closed
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes
Meanings
Possible Causes
E1
Longer inlet time.
Faucets are not opened, or water intake
is restricted, or water pressure is too low.
E4
Overflow.
Some element of dishwasher leaks.
E8
Failure of orientation of distributary valve.
Open circuit or break of distributary valve.
E9
Keep touching a button more than 30 seconds.
Water or other item on the button.
If overflow occurs, turn off the main water supply before calling service. If
there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
WARNING
Loading ...
Loading ...
Loading ...