Loading ...
Loading ...
Loading ...
96
parameters will appear. These fields are explained later in this help file.
UDP: Select UDP to filter IPv6 UDP protocol frames. Extra fields for defining UDP
parameters will appear. These fields are explained later in this help file.
TCP: Select TCP to filter IPv6 TCP protocol frames. Extra fields for defining TCP
parameters will appear. These fields are explained later in this help file.
Next Header Value When "Specific" is selected for the IPv6 next header value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IPv6
protocol value.
SIP Filter Specify the source IPv6 filter for this ACE.
Any: No source IPv6 filter is specified. (Source IPv6 filter is "don't-care".)
Specific: Source IPv6 filter is set to Network. Specify the source IPv6 address and
source IPv6 mask in the SIP Address fields that appear.
SIP address When "Specific" is selected for the source IPv6 filter, you can enter a specific SIPv6
address. The field only supported last 32 bits for IPv6 address.
SIP BitMask When "Specific" is selected for the source IPv6 filter, you can enter a specific SIPv6
mask. The field only supported last 32 bits for IPv6 address. Notice the usage of
bitmask, if the binary bit value is "0", it means this bit is "don't-care". The real
matched pattern is [sipv6_address & sipv6_bitmask] (last 32 bits). For example, if the
SIPv6 address is 2001::3 and the SIPv6 bitmask is 0xFFFFFFFE(bit 0 is "don't-care"
bit), then SIPv6 address 2001::2 and 2001::3 are applied to this rule.
Hop Limit Specify the hop limit settings for this ACE.
zero: IPv6 frames with a hop limit field greater than zero must not be able to match
this entry.
non-zero: IPv6 frames with a hop limit field greater than zero must be able to match
this entry.
Any
: Any value is allowed ("don't-care").
ICMP Parameters
ICMP Type Filter Specify the ICMP filter for this ACE.
Any: No ICMP filter is specified (ICMP filter status is "don't-care").
Specific: If you want to filter a specific ICMP filter with this ACE, you can enter a
specific ICMP value. A field for entering an ICMP value appears.
ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP value.
The allowed range is
0
to
255
. A frame that hits this ACE matches this ICMP value.
ICMP Code Filter Specify the ICMP code filter for this ACE.
Any: No ICMP code filter is specified (ICMP code filter status is "don't-care").
Specific: If you want to filter a specific ICMP code filter with this ACE, you can
enter a specific ICMP code value. A field for entering an ICMP code value appears.
Loading ...
Loading ...
Loading ...