Loading ...
Loading ...
Loading ...
Command Descriptions
93
RARP: Frame must have RARP opcode set to RARP.
Other
: Frame has unknown ARP/RARP Opcode flag.
Request/Reply Specify the available Request/Reply opcode (OP) flag for this ACE.
Any: No Request/Reply OP flag is specified. (OP is "don't-care".)
Request: Frame must have ARP Request or RARP Request OP flag set.
Reply
: Frame must have ARP Reply or RARP Reply OP flag.
Sender IP Filter Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)
Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP
Address field that appears.
Network: Sender IP filter is set to Network. Specify the sender IP address and
sender IP mask in the SIP Address and SIP Mask fields that appear.
Sender IP Address When "Host" or "Network" is selected for the sender IP filter, you can enter a specific
sender IP address in dotted decimal notation.
Sender IP Mask When "Network" is selected for the sender IP filter, you can enter a specific sender IP
mask in dotted decimal notation.
Target IP Filter Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is "don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address in the Target IP
Address field that appears. Network: Target IP filter is set to Network. Specify the
target IP address and target IP mask in the Target IP Address and Target IP Mask
fields that appear.
Target IP Address When "Host" or "Network" is selected for the target IP filter, you can enter a specific
target IP address in dotted decimal notation.
Target IP Mask When "Network" is selected for the target IP filter, you can enter a specific target IP
mask in dotted decimal notation.
ARP Sender MAC Match Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any
: Any value is allowed ("don't-care").
RARP Target MAC Match Specify whether frames can hit the action according to their target hardware address
field (THA) settings.
0: RARP frames where THA is not equal to the target MAC address.
1: RARP frames where THA is equal to the target MAC address.
Any
: Any value is allowed ("don't-care").
IP/Ethernet Length Specify whether frames can hit the action according to their ARP/RARP hardware
Loading ...
Loading ...
Loading ...