Loading ...
Loading ...
Loading ...
Command Descriptions
103
Enabled: Enable ARP Inspection operation.
Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you have to enable the setting of
"Check VLAN". The default setting of "Check VLAN" is disabled. When the setting of
"Check VLAN" is disabled, the log type of ARP Inspection will refer to the port setting.
And the setting of "Check VLAN" is enabled, the log type of ARP Inspection will refer
to the VLAN setting. Possible setting of "Check VLAN" are:
Enabled: Enable check VLAN operation.
Disabled: Disable check VLAN operation.
Only the Global Mode and Port Mode on a given port are enabled, and the setting of
"Check VLAN" is disabled, the log type of ARP Inspection will refer to the port setting.
There are four log types and possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL
: Log all entries.
Buttons
Click to save changes.
Click to undo any changes made locally and revert to previously saved
values.
Click to translate all dynamic entries to static entries.
Loading ...
Loading ...
Loading ...